AA371 Residential Wet Cleaning Kit — 30′ Hose, Stainless Wand & Floor Tools

Description

One kit, every wet surface in the house

Your Aqua-Air power unit does the pulling, heating and draining. AA371 gives you the tools that touch the floor. Connect the hose to any Aqua-Air wall inlet and you can extract carpet, hot-water mop tile and hardwood, clean upholstery and stairs, and pull up standing water — all through the same wall connection, with the dirty water carried straight back to the unit and into your plumbing. Nothing to empty, nothing to haul.

How the pieces work together

The 30′ hose carries suction and hot water together: the vacuum hose does the pulling while the blue solution line strapped alongside it delivers water and cleaning solution to the tool. The stainless steel wand takes the clear carpet head for extraction; you watch the soil lift through the acrylic and know when a pass is done. Swap to the clear detail tool for stairs, upholstery, pet beds and vehicle interiors. The 14″ brush and squeegee tool scrubs and dries tile, vinyl and sealed hardwood in one pass. The wand holder and hose hanger mount at the inlet so everything is put away in seconds.

Works with

• Every Aqua-Air power unit — Models 130, 150, 158, 230, 250 and 258
• Any Aqua-Air wet/dry wall inlet: AA131 wet/dry surface mount, AA131C wet/dry with chemical, AA135ZA water & suction outlet kit
• Add the AA242 water/chemical outlet kit if your inlets don’t already supply hot water

Choosing between AA371 and AA371A

Both kits contain the same tools. AA371 ships with a 30′ hose; AA371A ships with a 35′ hose for larger rooms or inlets set farther apart. Measure the longest run from an inlet to the far corner of the room you’ll clean most.

Replacement parts

Every tool in this kit is stocked separately: clear carpet head PA209, clear detail tool PA210, AA379 brush strips (AA380B) and squeegees (AA380S), hose cuffs PA167 and PA168, and PAF03 / PAF04 quick connects.

What’s in the kit

PA202R Stainless steel wet cleaning wand, 1¼”, with trigger valve Qty 1
Included with the kit (not sold separately on the site)

PA209 Acrylic Carpet Head-PA209 Qty 1
Clear acrylic carpet extraction head

PA210 Acrylic Upholstery Tool 3 1/2″-PA210 Qty 1
3½” clear acrylic detail tool with trigger valve

AA379 AA379 Brush & Squeegee Hard Floor Tool, 14″ — Scrub, Squeegee and Extract in One Pass Qty 1
14″ brush & squeegee hard floor tool

No separate part # 30′ wet/dry vacuum hose, 1.25″, with integrated blue solution line and hose straps Qty 1
Included with the kit (not sold separately)

PA168 PA168 Hose Cuff, 1.25″ with 1.5″ Metal End — Tool End for 1.25″ Hose Qty 1
Hose cuff, 1.25″ with 1.5″ metal end (tool end)

PA167 PA167 Hose Cuff, 1.25″ Thread × 1.5″ — Wall Inlet End for 1.25″ Hose Qty 1
Hose cuff, 1.25″ thread × 1.5″ (wall inlet end)

PAF03 PAF03 Male Quick Connect Fitting — 1/8″ Hot Water & Solution Line Qty 1
1/8″ male and female quick connects on the solution line

PAF04 PAF04 Female Quick Connect Fitting — 1/8″ Hot Water & Solution Line Qty 1
1/8″ male and female quick connects on the solution line

AA260 AA260 Wand Holder, Wall Mount — Hangs the Wand at the Inlet Qty 1
Wall-mount wand holder

AA451 AA451 Hose Hanger — Wall-Mount Basket for Vacuum and Water Hose Qty 1
Hose hanger