Commercial Wet/Dry Cleaning Systems
Clean, rinse, dry, and disinfect with no touch and no mess. Aqua-Air handles the jobs a normal vacuum can’t, then pulls the water and debris straight to the drain.
Request a ConsultationWhat a system costs
Most commercial installations run $8,000 to $20,000, depending on the size of the building and how many people need to clean at the same time.
A recent example
A 5,000 sq ft pet facility with grooming, set up for two people cleaning at once: Model 258 power unit, motor booster, five water and chemical outlets, two 40-foot animal care wet kits, a commercial dry kit, kennel brush and chemical injector.
$13,746equipment
What you provide
- One dedicated 20A 120V outlet per motor in the power unit
- Hot and cold water spigots
- A drain source
- 2-inch central vacuum pipe and PEX tubing
- Installation
Shipping quoted separately. Aqua-Air supplies the system and the parts; installation is handled by your own contractor or local installer.
Free quote from your facility blueprint
Send us your floor plan or blueprint and we will lay out the system for your building and send back a complete quote. No charge, no obligation, usually within one business day.
Submit the form and we will reply with where to send your plans, or email them straight to aa@aquaair-wetdry.com. PDF, CAD, or a clear photo of the drawings all work.
Industries that clean better with Aqua-Air
Veterinary, Kennels & Pet Resorts
Uses about 0.5 GPM vs 5 GPM for a hose, catches hair and solids before the drain, and leaves floors nearly dry, healthier for animals, staff and clients.
Restaurants & Food Service
Eliminate clogging and slip-and-fall problems. Hot water and disinfectant on demand cut grease and sanitize floors in one pass.
Car Washes & Auto Detailers
On-demand suction and wet tools clean interiors, upholstery, mats and bays fast. Dual-motor units keep up with high volume.
Nursing, Surgical & Care Centers
On-demand disinfectant plus cyclonic filtration that removes contaminants from the building for better air quality.
Daycare Centers
Sanitizing, low-touch cleaning for high-traffic floors where hygiene and safety matter most.
Convenience Stores & Transit
Fast no-touch cleanup of spills and high-traffic surfaces, with waste sent straight to the drain.
More cleaning power, a fraction of the water
Open hose ~5 GPM • Pressure washer 2-6 GPM • Aqua-Air ~0.5 GPM. Better for your utility bill and your sanitary system.
Get a QuoteWhat operators say
Facilities running Aqua-Air include: K9.5 Training Academy, Terre Haute, IN
We can clean spills in the dining area leaving no sticky residue while our guests are eating. When we clean the food preparation areas, the floors are clean and dry when we finish. In the restrooms, we do not have to physically touch the surfaces in order to clean and disinfect them.
The cleaning process takes less time to complete, is more thorough than other methods, and is actually somewhat enjoyable for our crew. We have eliminated the need for mops and buckets and we are using less chemicals by eliminating measuring errors.
Paul Clause, Owner/Operator, national burger franchise location, Kansas City, MO
One of a Kind Pet Rescue, Akron, Ohio
An 8,750 sq ft, $2.5 million adoption center. Builders Exchange Magazine covered the project and singled out the cleaning system: the wand lifts hair, spilled food and urine immediately without spreading it, pipes cleaning solution and disinfectant through the same wand, then vacuums the rinse water back up, “leaving the area dry for the pet.”
System installed by ABL Electric & Innovations, Bryan, Ohio.
Spiral-Flush tubing: the system cleans its own pipes
The usual worry with any built-in system is what happens inside the walls. Spiral-Flush tubing, as designed and laid out by your Aqua-Air installation technician, sets up a spiralling airflow that flushes the interior walls of the tubing every time the system is used for wet cleaning. Debris never gets the chance to build up.
Used with approved Aqua-Air cleaning solutions, dirt and debris will not stick to the piping when you dry vacuum afterward. Run a few gallons of clean water through the system periodically and the piping, hoses and tools flush themselves.