Description
Built for the way animal facilities actually get dirty
Kennel runs, exam rooms, grooming tables and boarding suites take hair, urine, feces, mud and disinfectant every day. Hosing it toward a drain uses gallons of water, floods the floor and sends hair straight into the plumbing. AA394 gives your Aqua-Air system the tools to do it properly: pre-spray, scrub, then extract the dirty water and solids back to the power unit, where debris is screened out before anything reaches your drain. Floors are walkable almost immediately — which matters when an animal is going right back into that run.
How it’s used
Lay down pre-spray or disinfectant with the AA115 pre-spray wand on the 40′ water hose — the 24″ extension reaches the back of a run without stepping in. Scrub and extract with the AA379 brush and squeegee floor tool on the 40′ vacuum/water hose: the brush loosens, the squeegee pulls the water, the vacuum takes it away. Use the stainless wand for carpeted lobbies and mats and the detail tool for cage bottoms, grooming tables, ledges and corners. A full rebuild set for the floor tool — spare brushes, squeegees, wheels and wheel brackets — ships in the box so a worn blade never takes a tool out of service.
Why facilities switch from a hose and a squeegee
- Water: around half a gallon per minute versus roughly five for an open hose — less water heated, less water drained.
- Drains: hair and solids are pulled into the power unit and screened out instead of matting in floor drains.
- Dry time: extracted floors dry in minutes, cutting slip hazards and returning runs to service faster.
- Hygiene: hot water and disinfectant are delivered at the tool; dirty water leaves through the wall, not in a bucket carried through the clinic.
Works with
- Aqua-Air power units — Model 158 for smaller clinics; dual-motor Models 230, 250 and 258 for kennels and boarding facilities
- Aqua-Air commercial wall inlets — AA545P Pet/Commercial Outlet Kit, AA235Z Water/Chemical/Suction Commercial Kit, AA131C Wet/Dry with Chemical Surface Mount
Choosing between AA391 and AA394
AA391 ships 30′ hoses (AA277 vacuum/water and AA225 water); AA394 ships 40′ hoses (AA279 and AA226) to cover a full row of runs from a single inlet, and adds a second hose hanger. Measure the longest reach from an inlet to the far end of the area it serves.
What’s in the kit
40′ wet/dry vacuum hose, 1.25″, with external solution line, cuffs and quick connects
40′ water hose with quick connects (for pre-spray and rinse)
46″ stainless steel wet cleaning wand with trigger valve and spray jet
Pre-spray / rinse wand with 24″ extension and quick-connect nozzle
14″ brush & squeegee hard floor tool
Replacement squeegee for AA379 (oil resistant)
Commercial soft dust brush, 1.5″












Reviews
There are no reviews yet.