Description
Dry inlet, mounted on the wall surface
AA131D is the dry-only version of the Aqua-Air surface mount: a 2″ vacuum inlet valve, a wall switch and a muffler on a single plate that screws to the wall face. Run 2″ pipe to it along the surface and you have a working inlet without cutting into the wall.
What’s included
| Part # | Item | Qty |
|---|---|---|
| PA138R | Vacuum inlet valve and cover, white | 1 |
| PA181 | Wall switch, white | 1 |
| PA086 | Square muffler, white | 1 |
| PA088 | 90° short socket elbow and pipe cap for 2″ vacuum pipe | 1 |
| PA132 | Mounting plate, 2×3 | 1 |
| — | Section of 2″ white vacuum pipe and stainless hardware | 1 |
Where it’s used
- Garages, workshops and utility rooms
- Retrofit inlets in finished spaces
- Block, brick and tile walls
- Commercial dry-vacuum stations paired with the AA252 / AA254 dry kits
Installation
Surface mount — no wall cavity needed. Pipe connects at the back through the short 90° elbow and pipe caps; the built-in muffler quiets the inlet. Mounts on the 2×3 plate with the included hardware. Replacement inlet valve/cover: PA138R. Replacement quick connect: PAF04.
Reviews
There are no reviews yet.